Denon DCM-5001 Mode D'emploi page 13

Mode switch setting with daisy chain connection
Set the mode switches of the different components as described on the tables below.
Main unit (DCM-5000) setting
Switch setting
SW1 SW2 SW3 SW4
1 0 0
Sub unit (DCM-5001) setting
Switch setting
SW1 SW2 SW3 SW4
0 0 0
0 0 1
0 0 1
0 1 0
0 1 0
Be sure to make the above settings. Be sure to set the DCM-5000 as the main unit. The first sub unit (the sub unit connected after
*
the main unit) must be set to "0001". It cannot be set as the second or third sub unit.
It is also not possible to skip numbers in the middle. The sub unit connected after the first sub unit must be set to the ID number for
the second sub unit.
If the mode switches are set wrong, the system cannot be operated normaly.
*
Example: For the 3rd sub unit
DCM-5000
"1000"
Setting (ID No.)
0 Main unit of a daisy chain
Setting (ID No.)
1 1st sub unit in daisy chain
0 2nd sub unit in daisy chain
1 3rd sub unit in daisy chain
0 4th sub unit in daisy chain
1 5th sub unit in daisy chain
DCM-5001
1st sub unit
"0001"
Disc no. assignment
Disc no. assignment
DCM-5001 DCM-5001
2nd sub unit 3rd sub unit
"0010" "0011"
ENGLISH
1 ~ 100
101 ~ 200
201 ~ 300
301 ~ 400
401 ~ 500
501 ~ 600
13