Remote Control Setup; Cleaning & Storage - Shaper Image AXIS 47 AIRBAR Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

REMOTE CONTROL

REMOTE CONTROL SETUP

You will need to pair your remote to your AXIS 47 Airbar Tower Fan. To pair remote,
following the following steps:
1. Power Tower Fan ON.
2. Verify batteries are correctly installed in remote.
3. Press and hold '+' and '-' Tower Fan buttons for three seconds.
4. Lights on Tower Fan will begin to flash.
5. Press power button on remote within 10 seconds.
6. Tower Fan will power off to indicate remote and Tower Fan are paired.
NOTE: You should only need to pair your Tower Fan and Remote with the first use
of your product. If, for some reason, the remote loses its connection, repeat steps
1-6 above.
16 English
CLEANING & STORAGE
Your fan will need regular cleaning. The fan has no user serviceable parts inside
and cannot be opened for cleaning. Never clean the product in any manner
other than instructed in this owner's guide.
1. Power off and unplug the unit prior to cleaning.
2. Dust or wipe the fan with a damp cloth.
3. Use the brush attachment on your household vacuum cleaner to vacuum any
accumulated dust.
Note: The motor is permanently
lubricated and requires no oiling.
During the off-season or after extended periods of non-use, you may choose to
store your fan. To ensure long life of the product, it is recommended to store your
fan by following these instructions:
1. Unplug power cord and bundle loosely.
2. Cover, or place back in retail carton if available. This prevents fan from
accumulating dust over time.
3. Store fan in cool and dry location.
English
17

Publicité

Table des Matières
loading

Table des Matières