Troubleshooting; Warranty - Shaper Image AXIS 47 AIRBAR Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING

PROBLEM
POSSIBLE CAUSE AND SOLUTION
The unit fails to
Unit is not plugged in.
power on.
Unit is damaged or in need of repair. Cease usage and unplug.
Contact Consumer Service for assistance.
Fuse needs to be replaced. See IMPORTANT INSTRUCTIONS for
how to replace the fuse or contact Consumer Service.
Unit is not pro-
Ensure unit is set to highest setting for maximum air circulation.
ducing sufficient
Allow the unit to fully circulate the air throughout the room, this
amount of air.
may take several minutes.
Ensure all air inlets and outlet grill are unobstructed.
Remote Control is
The battery is dead. Replace with 2 new AAA batteries. Refer to
not working.
REMOTE CONTROL - Battery Replacement for instructions.
The remote control is not properly paired with device. See
REMOTE CONTROL SET UP.
GFCI has tripped.
Under certain conditions, it is possible for a reset GFCI (Ground
Fault Circuit Interrupter) outlet to trip when the user is changing
speeds on a fan. In this event, change to an outlet that is not
connected to a GFCI device. It could also indicate a weak or
defective GFCI outlet. Contact a qualified electrician to check
the GFCI outlet.
18 English

WARRANTY

1
If you're not satisfied with this product, let us know.
YEAR
SATISFACTION
G U A R A N T E E
Vornado Air, LLC warrants to the original consumer or purchaser this Sharper Image®
Fan ("Product") is free from defects in material or workmanship for a period of one (1)
year from the date of purchase. If any such defect is discovered within the warranty
period, Vornado, at its discretion, will repair or replace the Product at no cost.
For warranty or repair service: Call 833-800-8669 or email help@sihomecomfort.com
to obtain a Return Authorization ("RA") form. Please have or include your Product's
model number and serial number, as well as your name, address, city, state, zip code
and phone number when contacting Vornado for warranty service.
After receiving the RA form, ship your Product to: Vornado Air LLC Attn: Warranty &
Repair 415 East 13th Street Andover, KS 67002. For your convenience, please have your
model number and serial number when contacting Vornado with service inquiries.
To assure proper handling, packages must be clearly marked with the RA number.
Packages not clearly marked with the RA number may be refused at the receiving
dock. Please allow 1-2 weeks for repair and return of your Product after the Product is
received.
Repairs not covered by the warranty or outside the warranty period will require a fee to
cover the cost of materials, labor, handling and shipping.
This warranty does not apply to defects resulting from abuse of the Product,
modification, alteration, mishandling, improper maintenance, commercial use or repair
or service of the Product by anyone other than Vornado; damages which occur in
shipment or are attributed to acts of God. Improper product use, which includes using
an external device that alters or converts the voltage or frequency of electricity, or
English
19

Publicité

Table des Matières
loading

Table des Matières