Assembly - Shaper Image AXIS 47 AIRBAR Guide D'utilisation

ASSEMBLY

No tools required.
The AXIS 47 can be used in one of two orientations: horizontal or vertical.
For HORIZONTAL orientation:
1. Lay the fan body horizontally.
2. Install the 2 bottom half magnetic base
parts, one on each end of the fan body.
Take care to align the notch on each
bottom base part with the notch on the
fan body.
3. Install the 2 top half magnetic base parts.
Again, take care to align the notches
on the base parts with the notches on
the fan body. When properly installed,
the top and bottom base parts will
magnetically click into place.
12 English
For VERTICAL orientation:
1. Lay the fan body horizontally.
2. Locate the power cord. This will be the
bottom of the product in the vertical
orientation.
3. Install the 2 bottom half magnetic base
parts to the bottom of the fan head (the
end with the power cord). Take care to
align the notch on each bottom base
parts with the notches on the fan body.
4. Install the 2 top half magnetic base parts
on the other end of the fan head. Again,
take care to align the notches on the
base parts with the notches on the fan
body. When properly installed, the base
parts will magnetically click into place.
5. Lift product to vertical orientation to use.
English 13