How To Use; Power On/Off; Remote Control - Shaper Image AXIS 47 AIRBAR Guide D'utilisation

HOW TO USE

POWER ON / OFF
1. Touch ( ) to power unit on and off.
2. There are three speeds: HIGH, MEDIUM, LOW.
3. Touch ( ) to lower speed. Touch ( ) to increase speed.
14 English

REMOTE CONTROL

This product comes with a remote control. The remote control functions are the
same as the control panel on the product.
For battery replacement, always use the correct size and grade of battery for this
product.
Note: Remove batteries from the remote control when not in use for an
extended period of time and always remove dead batteries immediately and
replace with fresh. Do not store dead batteries in remote.
The remote control requires 2 AAA
batteries (included but not installed).
To install the batteries, remove the
cover located on the underside of the
remote control. If necessary, clean
the battery contacts and also those of
the device prior to battery installation.
Remove any plastic protection from
the batteries. On the inside of the
battery cover there is a + and a – sign
indicating which direction you should
insert your batteries. Ensure the
batteries are installed correctly with
regard to polarity. Then replace the
cover onto the bottom of the remote.
English 15