Inadmissible Operating Conditions; Residual Risks - Reflex Exvoid A 60.3 Mode D'emploi

Safety
1.5

Inadmissible operating conditions

The device is not suited for the following conditions.
• In drinking water systems
• Outdoor operation
• Usage with mineral oils
• Usage with flammable media
• For the use with distilled water
• For use with foam-forming substances because this may compromise operation of the vent and result in leaks.
• For use with additives in a concentration above the permissible dosing quantity
• For use with chemical substances, for which no compatibility tests have been performed for all materials present in the system
• For use with water with a glycol content of greater than 50%
1.6

Residual risks

This device has been manufactured to the current state of the art. However, some residual risk cannot be excluded.
WARNING
Risk of injury due to heavy weight
The devices are heavy. Consequently, there is a risk of physical injury and accidents.
– Use suitable lifting equipment for transportation and installation.
CAUTION
Risk of burns
High media and surface temperatures in heating systems can cause burns to the skin.
• Allow the system to cool before working on the device.
• Maintain a sufficient distance from escaping medium.
• Wear suitable personal protective equipment (safety gloves and goggles).
• Please place appropriate warning signs in the vicinity of the device.
CAUTION
Risk of injury due to pressurised liquid
If installation, removal or maintenance work is not carried out correctly, there is a risk of burns and other injuries at the connection
points, if pressurised hot water or hot steam suddenly escapes.
• Ensure proper installation, removal or maintenance work.
• Ensure that the system is de-pressurised before performing installation, removal or maintenance work at the connection points.
18 — English Reflex ex separator — 21.11.2016