Jøtul F 105 R Manuel D'installation page 19

4.6 Fitting a flue pipe with a rear outlet
The product is supplied from the factory with the smoke outlet
fitted for the top outlet. If you want a rear outlet, proceed as
follows:
Fig. 20
1. Remove the baffle by lifting at the rear edge, and unscrew
the two screws. Then twist it out of the burn chamber.
Fig. 21
1. Place the product in a correct position. See fig. 1
2. Remove the exhaust deflector (A).
A
A
Fig. 22
3. Unscrew the screws (A) and remove the smoke outlet (B)
from the top outlet.
Fig. 23
A
1. Unscrew the screws (B) and remove the cover (A) of the
rear outlet from the inside of the burn chamber.
ENGLISH
B
A
B
B
19