Utilisation D'un Serveur Bootp - Rockwell Automation Allen-Bradley 1756-ENET/B Manuel Utilisateur

Utilisation d'un serveur
BootP
EXEMPLE
La valeur par défaut du module Ethernet est BootP activé. Voici un
exemple d'un fichier d'onglet BootP pouvant être utilisé avec un
serveur BootP :
# Example /etc./bootptab: database for bootp server (/etc./bootpd).
#
# Format:
# nodename:tag=value:tag=value: . . . .:tag=value
#
# first field – – nodename (hostname) of terminal followed by colon
# (should be full domain name)
#
# Blank lines and lines beginning with '#' are ignored.
# Make sure you include a colon and a backslash to continue a line.
# Don't put any spaces in the tag–value string.
# The ht tag MUST precede the ha tag.
#
# The options below are specified as tag=value and delimited by colons
# These are the options used by the 1756-ENET/B module:
#
# gw – – gateway IP address
# ha – – hardware address (link level address) (hex)
# ht – – hardware type (either) (must precede the ha tag)
# ip – – IP address
# sm – – network subnet mask
# tc – – template for common defaults (should be the first option listed)
#
# vm – – vendor magic cookie selector (MUST be rfc1048 for
1756-ENET/B)
#
#-––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
# default values for 1756-ENET/B
icp.defaults:\
ht=ether:\
vm=rfc1048:\
sm=255.255.254.0:\
gw=130.151.132.1
#-––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
zappa0:\
tc=icp.defaults:\
ha=0000bc03404f:\
ip=130.151.132.121
zappa1:\
tc=icp.defaults:\
ha=0000bc034073:\
ip=130.151.132.122
zappa2:\
tc=icp.defaults:\
ha=0000bc034022:\
ip=130.151.132.123
Configuration du module Ethernet
Publication 1756-UM051B-FR-P - Novembre 2000
4-5