Check Voe Availability (Command: V I); Mac Address, Nsm Setup (Command: V J); Product Name. (Command : F V) - HP Touch Screen Guide De L'utilisateur

Data
"hhhhhhhh" where h is a hex value

53. Check VOE Availability (Command: v i)

To check whether display is free or attached to a media player by VOE. When the display is attached,
no configuration may be performed..
Transmission
[v][i][ ][Set ID][ ][Data][Cr]
Data
The data is always ff(in Hex).
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data
0: Free
1: Busy (Configuring display not allowed)

54. Mac Address, NSM setup (Command: v j)

To set the Mac address for Network Sign Manager.
Transmission
[v][j][ ][Set ID][ ][Data][Cr]
Data
The data is always ff(in Hex).
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data
"hhhhhhhh" where h is a hex value

55. Product Name. (Command : f v)

To read the product name.
REMARQUE :
controls.
Transmission
[f][v][][Set ID][][Data] [Cr]
Data
The data is always ff(in Hex).
Acknowledgement
[v][][Set ID][][OK/NG][Data][x]
108 Annexe C Contrôle de produits multiples
NSM uses the Product Name to determine which command format to use for some