Tile V Position (Command: D F); Tile H Size (Command: D G); Tile V Size (Command: D H) - HP Touch Screen Guide De L'utilisateur

* This function is available only when the Natural option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data
00 to 20 (00H - 14H)
*Left/Right values depend on Tile H size.
** It may not be supported depending on the model.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]

29. Tile V Position (Command: d f)

To adjust the Tile Vertical position.
* This function is available only when the Natural option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data
0 to 20 (00H - 14H)
* Bottom/Top values depend on Tile Vertical size.
** It may not be supported depending on the model.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]

30. Tile H Size (Command: d g)

To adjust the Tile Horizontal size.
*Set Tile H Position to 0x32 before setting Tile H Size.
* This function is available only when the Natural option of the Tile Mode is set to Off while the Tile
Mode set to On.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data
0 to 50 (00H - 32H)
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]

31. Tile V Size (Command: d h)

To adjust the Tile Vertical size.
100 Annexe C Contrôle de produits multiples