Scheduling Input Select (Command : F U) (Main Picture Input); Ip Address, Voe Setup (Command: V F); Auto Detection (Command: F G) - HP Touch Screen Guide De L'utilisateur

Table des Matières

Publicité

47. Scheduling Input Select (Command : f u) (Main Picture Input)

To select input source for TV depending on day.
Transmission
[f][u][ ][Set ID][ ][Data1][ ][Data2][Cr]
Data1
f1h to f4h(write/read one index)
f1 : read 1st index of On Time Input
f2 : read 2nd index of On Time Input
f3 : read 3rd index of On Time Input
f4 : read 4th index of On Time Input
Data2
Data (Hex) INPUT
07 : RGB
08 : HDMI(DTV)
09 : HDMI(PC)
A : Display port (DTV)
B : Display port (PC)
C : VOE(PC)
D : VOE(DTV)
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data 1][Data 2][x]

48. IP Address, VOE Setup (Command: v f)

Set the IP address for VOE.
Transmission
[v][f][ ][Set ID][ ][Data][Cr]
Data (Add schedule)
The data is always ff(in Hex).
Acknowledgement
[f][][Set ID][][OK/NG][Data][x]
Data
"hhhhhhhh" where h is a hex value

49. Auto Detection (Command: f g)

Set Auto Detection.
Transmission
106 Annexe C Contrôle de produits multiples

Publicité

Table des Matières
loading

Table des Matières