Quick start
This section explains how to quickly set up the eMag 50 HD and use it for the first time.
1. Make sure that the device is fully charged. –> See page 12/13.
2. Switch on the eMag 50 HD by pressing the green/yellow button . –> See page 14.
3. Select one of the following options:
• Turn and extend the handle to hold and use the eMag 50 HD like a magnifying glass. This is useful if
you need to magnify and read labels or small print on tins, packaging, medication etc.
–> See page 15.
• Open the reading stand and place the eMag 50 HD on a flat document, such as a newspaper or
magazine, an invoice or a receipt, a letter etc. –> See page 16.
4. Adjust the level of magnification with the yellow buttons (
5. Select a colour mode ( or ) for contrasting colours that best suit your viewing needs.
–> See page 18/19.
6. Capture the image on the LCD screen
the image. –> See page 22.
7. Save the image or return to live view
10
or
). –> See page 17.
so that you can take the time you need to see the details in
. –> See page 26.