Timer Function; Temperature Function - Hama 00075298 Mode D'emploi

5.3. Birthday reminder
• Press the MODE button (2) three times in normal time mode to go
to the birthday reminder settings.
• Then press the SET button (4) to make the following settings in
order:
• Hours
• Minutes
• Year
• Month
• Day
• To select individual values, press the UP button (6) or the DOWN
button (5) and confirm each selection by pressing the SET button
(4).
• Press the SET button (4) to adopt the set value displayed and
to skip.
• Press the MODE button (2) repeatedly to switch between the
various modes.
Note – Birthday reminder
The reminder plays a birthday song at the specified time. This alarm
melody cannot be changed and continues to play for 5 minutes.

5.4. Timer function

• Press the MODE button (2) four times in normal time mode to go
to the timer function settings.
• Press the SET button (4). The hours display begins to flash.
• Press the DOWN button (5) or the UP button (6) to select the hour
and confirm your selection by pressing the SET button (4). The
minutes display begins to flash.
• Repeat the process to set the minutes.
• After the selection has been made and confirmed by pressing the
SET button (4), the count-down timer is activated.
Note – Count-down timer
• Once the count-down finishes, the alarm signal goes off for
one minute.
• You can press the ALARM button (3) to turn off the alarm
signal.

5.5. Temperature Function

• Temperature measurement starts automatically as soon as the
batteries are inserted. The display shows the current ambient
temperature.
• In normal time mode, press the SET button (4) to set Celsius or
Fahrenheit as the unit of measurement.
5