Hama 00075298 Mode D'emploi page 5

Note
• In the course of setting the date, the day of the week – Monday
(MON) to Sunday (SUN) – is set automatically.
• If you do not make an entry for 60 seconds, the settings will
automatically close.
5.2. Setting and using the alarm function
• In normal mode, press the MODE button (2) twice or the ALARM
button (3) once to set the alarm function. The display shows ALARM.
• Then press the SET button (4) to make the following settings in
order:
• Hours
• Minutes
• Alarm melody
• To select individual values, press the UP button (6) or the DOWN
button (5) and confirm each selection by pressing the SET button
(4).
• Press the SET button (4) to adopt the set value displayed and
to skip.
• Press the MODE button (2) repeatedly to switch between the
various modes.
• The alarm function is activated and ALARM is displayed in normal
mode.
• If the alarm is triggered, the selected alarm melody sounds.
• Press any button to stop the alarm. Otherwise, it will stop
automatically after 1 minute.
Note
• When the alarm function is activated, the alarm melody sounds
daily at the selected time.
• To completely deactivate the alarm function, enter alarm mode
(ALARM) and press the SET button (4) repeatedly until the
display does not show an alarm time (-:--).
• Now the display does not show ALARM any more.
Note – Snooze function
• In normal mode, press the UP button (5) to activate or
deactivate the snooze function. When the snooze function is
activated,
• The snooze function can only be activated when the alarm
function is active.
• With the snooze mode enabled, press any button while the
alarm is sounding to interrupt the alarm for a limited time. The
alarm melody sounds multiple times for one minute each.
4
is shown in the display.