Canon PIXMA iP100 Guide De Démarrage Rapide page 21

5
Press on the
the ink tank snaps firmly into place.
Confirm that the ink lamp (A) lights up red.
Important
If the front (innermost) part of the ink tank (A) is sticking up, push down on the Canon logo on the
ink tank as illustrated below. Do not remove the ink tank forcibly.
6
Close the Print Head Cover.
Note
When you start printing after replacing the ink tank, Print Head Cleaning is performed
automatically. Do not perform any other operations until Print Head Cleaning finishes. The Power
lamp flashes green during cleaning.
mark on the ink tank until
(A)
Replacing an Ink Tank
(A)
17