Programming Measures Function - Faema E71 Utilisation Et Installation

COFFEE
1
3
The icons of the programmable keys
are shown on the services display; the
numbers relative to each key appear
on the group display.
The key makes it possible to
program water doses with the SELF-
LEARNING function (see specific
paragraph).
5
By pressing the TEST key, the dispensing starts and
the following screen appears on the services display:
WATER
1
Press the icon
02_E71_2PRG_1646.indd 23

Programming measures function

Press the icon
.
2
Press the water key. These parameters can be con gured:
SET... - to set the dispensing time;
.
% - to set the water temperature.
2
4
When one of the coffee keys is
pressed (for example Key 1), the
following parameters are displayed
on the services display:
water dose;
infusion time;
the icon of the key in question will remain highlighted on
the group display.
NOTE : in the example,
in seconds of the infusion time and can be changed by the
user.
represents a parameter that can only be changed by
technical staff.
The parameters displayed are:
Dv: Volumetric meter incremental counter
tG: dispensing time
TB: instant coffee boiler temperature
RB: % activation coffee boiler resistance
P: service boiler pressure
Rc: service boiler resistance
SL: service boiler water level
Evc: service boiler load solenoid valve
23 EN
Press one of the
coffee keys (ex.
Group 3).
represents the duration
17/11/2016 13:47:42