Measuring The Density Of A Sinking Solid Using Water - OHAUS Pionnier PX85 Manuel D'instruction

PX Series Balance

4.5.1 Measuring the Density of a Sinking Solid Using Water

Press and hold the Function / Mode button until Density
appears. Press Yes to initiate the Density Determination.
Item Settings:
Sample type: Solid
Auxiliary Liquid: Water
Porous Material: Off
Water Temperature: Measure the actual water
temperature using a precision thermometer.
The water temperature is 20.0
Press No or Back to increase or decrease the value of
temperature. The balance calculates water density based on
the water temperature value entered.
1. Weigh the sample in air using the balance and the density
determination kit.
When the * (symbol of stability) appears, press the
Function / Mode button to confirm the weight of the
sample in the air.
2. Weigh the sample submerged in the liquid using the
balance and the density determination kit.
Note: Lower the sample down into the liquid until it is fully
submerged.
by default.
EN-17