Overview Of Display, Home Screen; Menu Structure; Using The Balance - OHAUS Scout SKX Serie Mode D'emploi

3. OPERATION

3.1 Overview of Display, Home Screen

Button
Functions:
Button
Zero/On
Short Press
Turns the balance on;
If balance is On, sets
Zero
Long Press
Turns the balance Off
Short Press
(Menu Accepts the current
Function) setting

3.2 Menu Structure

Cal Setup
Span Reset
Lin Filter
AZT
StableRange
Backlight
Auto Tare
Auto Off
End End

3.3 Using the Balance

Note: Before using any application, be sure the balance has been leveled and calibrated.
Weighing Application
1. If required, place an empty container on the pan and press Tare.
2. Add sample to the pan or container. The display shows the weight of the sample.
4. MAINTENANCE
4.1 Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.
Print
Initiates print
Off Units
Changes the
weighing unit
Yes
Advances to the
next menu or
setting
Mode
Reset
Weighing
Density
Mole Weighing
End
Function
Initiates an
application mode
Mode
Changes the
application mode
No Back
Moves to previous
menu item
Unit
Reset
g
kg
oz
lb:oz
lb
N
End
Tare
Tare
Menu
Enters the User
menu
Exit
Exits the User menu
End
EN-3