Power Supply - Gamko FLEXBAR Mode D'emploi

Power supply

• This product uses a separate device cable as the power cable. If this device cable is damaged it must be
replaced with an original cable supplied by the producer.
• In case of emergency: remove the plug lead from the socket.
• The socket should be within easy reach of the cabinet.
• Check for the correct power supply, referred to the information on the type plate.
• Ensure that the plug lead cannot become trapped or snagged.
• If necessary the plug lead can be extended by a qualified electrician.
• We do not recommend the use of an extension lead.
Fluctuations in the power supply can cause damage, which causes the cabinet to switch off.
Gamko cannot be held responsible for any consequential damage.
34