Technical Specifications - newmotion Home Standard 3,7 Manuel D'installation

TECHNICAL SPECIFICATIONS

Maximum charge capacity
Electric safety category
IK code (robustness)
Dimensions
Weight
Standard colour
Designed according to
Mains connection
kWh measurement
User interface
Identification
Communication
Protection class
Operating temperature
Humidity
Air pressure
Maximum mounting height
Disclaimer: This document does not remove the need for an electrician's insight to ensure that the installation work is
carried out safely and in accordance with the relevant legislation and regulations. Electricians are responsible at all times
for their own safety and for the safety of others. If the installation work is not carried out in accordance with these instruc-
tions, the electrician is liable for any damage that arises directly or indirectly as a result of the installation work.
IINSTALLATION INSTRUCTION – ENGLISH – P9
1-phase 16 A (3,7 kW)
3-phase 32 A (22 kW)
Both variants can be set to a lower amperage.
Class 1
IK10
503.5 x 200 x 137 mm
+/- 3.5 kg
Rear side RAL 7031 (grey)
Front side RAL 9010 (white)
IEC61851-1
IEC61851-22
ZE-Ready 1.2 Requirements
16 A, 230 V (1-phase), 50 Hz
16 A to 32 A, 400 V (3-phase), 50 Hz
Via current transformers
LED
Plug & Charge
Ethernet - OCPP (Port 80:80)
IP54 (for internal and external use)
-30°C to 50°C
5% to 95%
860 hPa and 1060 hPa
1.5 meter