Problems And Solutions - Hkoenig CAVIST149 Manuel D'utilisation

11. PROBLEMS AND SOLUTIONS

You can solve many simple problems with your wine cooler yourself, thus avoiding having to
contact your after- sales department. Try the following suggestions.
PROBLEM
Appliance is not running
Appliance is not cold
enough
The compressor starts
and stops frequently
LED lights do not
operate
Vibration
The appliance makes a
lot of noise
The door does not close
properly
LED display is not
working properly
POSSIBLE CAUSES
Appliance is not plugged in
Appliance is not turned on
Check if voltage of the installation
Check the circuit breaker or if fuse has blown
Check the temperature control setting
Check if ambient temperature is beyond appliance operating
temperature
The door is opened too frequently
The door is not closed properly
The door is not sealing properly
Insufficient free space around the appliance
The external temperature is high.
A large quantity of bottles has been put into the cellar.
The appliance is opened frequently.
The door is not properly closed.
The cellar has not been correctly set.
The appliance is not plugged in
The fuse has blown
LED lights are not broken
The light switch is off
Check and ensure that the appliance is level
A noise resembling circulating water is produced by the
coolant gas and this is normal.
At the end of a cooling cycle, you can hear the noise of
water circulating.
Expansion and contraction of the internal walls may cause a
cracking sound.
The appliance is not level
Check if fan is in good condition
The appliance is not level.
The door seal is dirty or damaged.
The shelves are not positioned correctly.
A part of the contents is preventing the door from closing.
Control panel failed
Power PCB has broken
The appliance is not plugged in
The probe is not working