Technical Specifications - Velleman Luxibel LX110 Mode D'emploi

Replacing the Fuse
Only replace the fuse by a fuse of the same type and rating.
1. Before replacing the fuse, unplug the mains lead.
2. Wedge the fuse holder out of its housing with a flat-head screwdriver.
3. Remove the damaged fuse from its holder and replace with the exact same type of fuse.
4. Insert the fuse holder back in its place and reconnect power.
9.

Technical Specifications

power supply
power consumption
LED source
beam angle
pitch
DMX in- and output
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.luxibel.com.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 01 – 21/03/2013
LX110
100 ~ 240 VAC / 50 - 60 Hz
100 W
9 high power tri-colour COB LEDs
63°
115
3-pin XLR
340 x 340 x 90 mm
5 kg
9 ©Velleman nv