Functions; Maintenance - Duux Tag Manuel D'utilisation

3. Functions

Note: see product overview (chapter 1) for
reference.
Top cover
1
The structure of the device allows the mist to be
efficiently distributed. Always keep this cover on
when using the device. Hold and lift the tab of
the top cover to remove the top cover.
Mist outlet
2
This is where the mist comes out. Blocking the
outlet may cause breakdowns.
Water tank
3
Remove the tank from the device and fill it with
water.
Power/water supply indicator
4
Blue indication means that the device is
powered on. When it blinks red, the water
needs to be refilled.
Mist output indicators
5
The selected mist output is lit. Mist volume MIN
(minimum) is on as default setting.
Power button
6
Turns on or turns off the power every time you
press it.
Mist output button
7
You can switch between MAX (maximum) and
MIN (minimum) level of mist output each time
you press it.
12
DUU15045_Handleiding-TAG-Universeel.indd 12-13
Caution: Please be careful not to overhumidify.
Depending on the room size, environment and use,
it can lead to wet floors due to condensation.
Light button
8
You can switch the bottom light off and on each
time you press this button.
Power cable
9
Directly connect the plug to a wall outlet.
Water tank cap
10
Please remove the cap when pouring water into
the water tank. After pouring, close it tightly.
Anti-scale and antibacterial cartridge
11
This cartridge will reduce the hardness of the
water and prevents white dust produced by
ultrasonic mist. It also removes bacteria from
the water for hygienic mist output.
Water supply entrance
12
Use this entrance to fill the tank with water.
Ultrasonic membrane
13
Mist is created due to ultrasonic sound waves.
You can adjust the amount of mist with the mist
button.
Caution: Please regularly clean the device for
long-lasting use. Depending on the hardness of the
local tap water, we advise to use distilled water.

4. Maintenance

Important: Be sure to remove the power plug
from the outlet before carrying out maintenance.
Important: Do not soak or immerse the power
plug or the device in water.
Important: We recommend daily maintenance
to prevent the growth of bacteria and scale inside
the water tank.
Daily maintanance
Switch the power button to OFF and remove
1
the power plug;
Remove the top cover and water tank from the
2
device.
Remove the water tank from the device and
3
throw away the water remaining in the water
tank.
Pour a small amount of water into the water
4
tank, firmly close the water tank cap and shake
to rinse.
13
14-04-17 15:46