Functions - Duux Beam mini DXHU06 Manuel D'utilisation

4. Functions

1
2
3
4
Control panel / remote control
Power
1
Switch mode
2
Increase
3
Decrease
4
10
1
4
2 5
3 6
Display
1 Temperature (°C) / Humidity (%) display / Timer (H)
Auto mode indicator
2
Water replacement indicator
3
Mist output level
4
Timer indicator
5
WIFI indicator
6
Power
Press the power button to switch on the device
and the display will light up. The monitoring screen
will show the actual temperature and humidity
every 5 seconds. Press again to switch off the
device (the device will remain in stand-by mode
until the plug is removed from the wall outlet). The
default humidity setting is MEDIUM output.
Note: you can also switch on the device with
the touch button on the device, located behind the
control panel / remote control.
Switch mode
Press the button to switch between modes on
the device. The selected mode will illuminate as
+
indicator on the display. Once selected, use and
to adjust the setting of the corresponding function.
Increase /
decrease mist output
+
Press the button increase the mist output.
The mist output level bars will change accordingly.
-
Pressing the button will decrease the mist output.
The are three mist output levels:
LOW , MEDIUM ,
HIGH
Note: The mist output setting will not cycle
when pressing + or - button multiple times
Auto mode
Press the button until the indicator is
selected on the display. The mist output intensity
will now self-regulate according to the ambient
-
relative humidity. Press + and - to change the
desired humidity in the following order: 40% > 45%
> 50% > 55% > 60% > 65% > 70% > 75% > 80% >
85% > 90% > ACTUAL HUMIDITY > 40% > 50% > ...
and so on. Each press will increase/decrease with
5%. Once released, the selected humidity will blink
3 seconds to confirm your choice.
When the hygrostat is set above the actual
humidity, the device will operate in high speed until
the desired humidity has been reached. When
the hygrostat is set below the actual humidity, the
device will not humidify. After setting the hygrostat,
the display will show the ambient relative humidity.
11