Filling The Water Tank - Duux Tag Manuel D'utilisation

• If there is interference with TV, radio or other
electrical devices, please move the device.
• When moving the device please move it with the
base of the device held securely
• The device does not have an automatic humidity
adjustment feature. Wet floors and condensation
can form easily in rooms with lower temperatures
or high levels of humidity.
• Adjust the level of humidity with the mist button,
with adequate consideration of the space the
device is located in, and by either raising the
room temperature or turning off the device.
6
DUU15045_Handleiding-TAG-Universeel.indd 6-7

Filling the water tank

Note: Please check that the power is off
before removing the water tank from the
device.
Remove the top surface
1
cover. Hold and lift the
label on the top cover when
removing the top cover.
Take out the water tank
2
Caution: Do not tilt the
device when raising the water
tank. This may lead to spillage
of water remaining in the device.
Turn the water tank cap
3
counter-clockwise and
remove from water tank.
Pour water in the water
4
tank.
Note: we advise to use distilled or mineral water
as water source. When using tap water, there is a
risk of bacteria growth and increased scale.
Caution: Do not use hot water. It may deform
the shape of a water tank.
The paws of the water tank cap are attached to
5
fit into the feed-water inlet cuts. Firmly turn it
clockwise until it stops.
Caution: Please carefully check that the water
tank cap has not been inserted diagonally.
Caution: Please check whether the
rubber seals on the water tank cap are properly
attached.
Place back the water tank cap on the device
6
after carefully checking whether the water tank
is properly in place and attach the top surface
cover.
Caution: Be sure to place back the top cover
after refilling the tank. The mist will not be efficiently
distributed without its top cover.
7
14-04-17 15:46