Light Control; Plasmacluster Ion On/Off; Adjustment Of Sensor Detection Sensitivity - Sharp Ua-Pgsoe Manuel De Fonctionnement

LIGHT CONTROL

You can turn off the DUST AND ODOUR /PLASMACLUSTER SIGN when they are lighting up.
<;:D
ON
(2)
·fJ.·ON/OF
more than 3 sec.
i°Press3sec.)

PLASMACLUSTER ION ON/OFF

When Plasmacluster Ion is ON, the PLASMACLUSTER SIGN will turn on. (blue)
(In operation)
ON
<;:D
r
"•' ' 0 :/0F
more than 3 sec.
1rress 3 sec.)

ADJUSTMENT OF SENSOR DETECTION SENSITIVITY

Set to "Low" if the DUST AND ODOUR SIGN is constantly
and set to "High" if the DUST AND ODOUR SIGN is constantly green to increase sensitivity.
(with the unit OFF)
<;:D
1
r
'
more than 3 sec.
<;:D
2
Select the
r
sensor detection
'
sensitivity.
3
<;f9
C)
OFF
<;ID
(2)
more than 3 sec.
·.y, ON/OFF
I Press 3secJ
OFF
<;:D
High
·········
.A .
©
·········
Standard
.- <;:D
.........
Low
.
...
E-7
NOTE
• When the unit restarts its
operation, Light Control
resumes its setting set before
turning off.
• At Sleep Mode, Light Control
is available.
red to reduce sensitivity,
NOTE
• If the Power ON/OFF Button
not pressed within 8 seconds of
adjusting sensor sensitivity, the
setting will be saved automatically.
• The sensor sensitivity setting
will be saved even if the unit is
unplugged.
is