Varan Motors ZS180-A Manuel D'utilisation page 19

Replace Sanding Pad 【1-6】
 Insert the hex wrench (size 5) into the hexagonal screw bolt on the sanding pad
 Hold the sanding pad firmly, and then turn the wrench to dismount the pad.
 Install new sanding pad by tightening the bolt
Attention: Only install the specified sanding pad on the machine.
Stick the Sanding Paper to the Pad【1-7】
Please ensure the holes on the sanding paper to fit the holes on the pad accurately.
Varan Motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg T: 00352/26908036 – F: 00352/26908040
ZS180-A