Safety Instructions - Varan Motors ZS180-A Manuel D'utilisation

SAFETY INSTRUCTIONS

The following pictograms appear throughout these operating instructions:
Indicates danger of injury, risk to life and possible damage to the appliance if these
instructions are not followed.
Indicates the presence of electric shocks.
Read through these operating instructions carefully before using the appliance. Become familiar with the functions
and method of operation. To ensure proper operation, always maintain the appliance according to the
instructions. The operating instructions and associated documents should always be kept close to the appliance.
When using power tools, you must observe the following basic safety precautions in order to ensure protection
from electric shocks, injury and fire. Read and follow all the instructions before using this power tool. Look after
the notes on safety.
Always check if your mains voltage corresponds with the value on the type plate
The machine has been double-insulated in accordance with EN60745: therefore, an earth wire
is not necessary
USE CORRECT SUPPLY VOLTAGE: The power supply voltage must match the information quoted on the tools
identification plate.
USE PROPER EXTENSION CORD: Only use an approved extension cable that is suitable for the machine's power.
The cord must have a diameter of at least 1.5mm
entirety.
Varan Motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
Drywall Sander
ZS180-A
User Manual
2
.When the extension cable is on a reel, unroll the cable in its
T: 00352/26908036 – F: 00352/26908040
ZS180-A