Trouble Shooting - Parkside Pasa 20-Li A1 Traduction Des Instructions Originales

GB MT

Trouble shooting

Problem
Device does not
start
Device works with
interruptions
Poor sawing per-
formance
Saw blade quickly
becomes blunt
30
Possible cause
Discharge the battery (9)
Battery (9) not inserted
Switch lock (6) has not
been activated properly
On/off switch (7) is broken Repair by Service Centre
Internal loose contact
On/off switch (7) is defec-
tive
Saw blade (1) blunt
Incorrect sawing speed
Low battery power
Too much pressure applied
Sawing speed too high
Corrective action
Charge rechargeable battery
(see separate operating instructions)
Insert the battery
(see "Inserting/removing the battery")
Switch it on (see "Operation")
Repair by Service Centre
Insert a new saw blade
Adjust sawing speed
Charge rechargeable battery
(see separate operating instructions)
Reduce the pressure
Reduce the sawing speed