Descaling Programme; Cleaning And Maintenance; Disposal Instructions - Melitta AromaSignature Therm Mode D'emploi

GB
from the filter.
• Put a coffee filter into the filter. Add enough
ground coffee for the desired number of cups
• Replace the filter lid. Push the filter back into
the holder until you hear it click into place
• Start brewing by pressing the Start & Stop
button . The LED illuminates and brewing

begins.
• AromaSignature
best aroma when making less than 6 cups, start
the appliance in '2-5 cup' mode
the 2-5 cups button
Stop button . This extends the brewing time

giving you the best aromatic coffee result even
with small amounts of coffee.
• At the end of the brewing the tank illumination
turns itself off. After the chosen warm keeping
time the appliance automatically turns off.
• AromaSignature
end of brewing is indicated by a sound signal.
• After brewing you can remove the pot from
the appliance. The drip stop
onto the hotplate.
3.2 Using the insulated jug
• The brewed coffee flows through the central
opening in the lid directly into the jug.
• To pour the coffee press down on the closing
lever .

• To remove the lid, hold the side locks down
and simply lift up the lid. Hold the side locks
down when you replace the lid

4. Descaling Programme

Depending on the regional water hardness
the device can become calcified over time.
This leads to an increased energy consumpti-
on caused by limescale in the heating element
which prevent the optimal energy transfer to
the water. Excessive calcification can lead to
damage and affect the proper functioning of the
appliance. The red LED "DECALC" (5) lights
up while preparing coffee if there is too much
limescale on the heating element and indicates
that the appliance should be descaled as soon
as possible. We recommend the use of Melitta
Anti Calc Filter Café Machines.
• To prepare the descaling process fill the
water tank with descaler according to the
manufacturer's instructions.
• Press the DECALC button
flashes. Confirm your programme choice by
pressing the Start & Stop button
automatic descaling programme starts, this is
shown by the constantly illuminated green LED
and the flashing red LED.
• Attention: To ensure that the descaling agent
20

Therm DeLuxe: For the
®
. First press

and then the Start &

Therm DeLuxe: The
®
prevents dripping

.

. The red LED

briefly. The

has enough time to take effect, the water will
only start flowing into the pot after several
. minutes.

• When the descaling process is complete the
. red and green LEDs turn off.
• AromaSignature
In addition, a sound signal notifies you when
the descaling programme is finished.
• The appliance turns off automatically.
• After the descaling process the appliance must
be rinsed through twice with clean water and
without coffee to remove residual lime scale
and descaler.

5. Cleaning and maintenance

• Before cleaning turn the appliance off and
remove the power cable from the socket.
• Never immerse the appliance or the power
cable in water.
• Clean the fixed housing parts with a soft damp
cloth.
• Clean the parts, which come into contact with
coffee (therm jug, filter) after each use.
• Filter, filter lid, therm jug and water tank lid
can be cleaned in the dishwasher.
• The water overflow is removable and can also
be cleaned in the dishwasher.

6. Disposal instructions

• Please consult your electrical retailer or local
authority regarding the disposal of electrical
appliances
• Packaging is raw material and can be recycled.
Please make use of recycling facilities.
®
Therm DeLuxe:
®