Bigben TD115 SPS Mode D'emploi page 18

Charging the Bluetooth Speaker (Left or Right)
• Insert the AC adaptor plug in the DC in port behind the speaker & power supply socket
• The light indicator will flash red while speaker is charging.
• This unit has a built-in rechargeable lithium-ion battery. It will last for the unit's service life. When the
battery level drops substantially, please recharge the speaker.
• The user should not disassemble or remove the battery inside the speaker. Doing so could cause
leakage of an electrolytic substance and cancel warranty.
Bluetooth Pairing with Turntable
1. Turn on the Bluetooth speaker and establish a successful connection with the left & right speakers
(i.e. pairing the speakers)
2. Next, turn on the turntable and establish Bluetooth connection (i.e. pairing main unit to speaker)
• Remark: If the above steps are reversed, the user will fail to establish the Bluetooth connection.
Bluetooth Pairing Operation
• Turn on (18) both left & right Bluetooth speakers.
• Press (14) "Connect speaker" to establish a successful connection with both left & right speakers.
• Once the connection is established, the light indicator on the speaker will flash.
• On the rear panel of the turntable, press (8) to turn on the turntable & (10) to activate the BT Phono
transmitter.
• Bluetooth will be automatically paired between the turntable & the supplied pair of speaker or your
own sound Bluetooth system.
• Upon successful connection, the light indicator on speaker will flash blue light.
• Should Bluetooth pairing fail, to refresh pairing function, press (15) Bluetooth pair on speaker & turn
on (10) BT phono on turntable.
• When the Bluetooth transmitter is switched on, it will automatically connect to last connected device.
Bluetooth speakers connected to other devices:
• Turn off the Bluetooth, switch (10) from the turntable
• Turn on (15) both left & right Bluetooth speakers.
• Press (14) "Connect speaker" to get successful connection with both left & right speaker. You can
also use the speakers independently.
• Once connection is done, the light indicator on the speaker will flash.
• Using the native controls, turn on the Bluetooth pairing function on mobile / other Bluetooth devices.
• Select the pairing name TD115. Bluetooth will be automatically paired.
• Upon successful connection, the light indicator on the speaker will flash blue.
• To listen to audio, operate mobile / other Bluetooth devices as instructed by their manufacturers.
Bluetooth Transmission from the Turntable to other Bluetooth Speakers
• Power off the speaker (18) or turn off the Connect speaker (14) to disconnect the TD115's speaker
• Using native controls, turn on the other Bluetooth speakers as instructed by the manufacturers.
• On the turntable's rear panel, press (8) to turn on the turntable & (10) to activate the BT transmitter.
• Select pairing name TD115. The Bluetooth connection will be automatically paired between the
turntable & the speakers.
• To operate the turntable as described below:
• The Bluetooth speakers (ver. 2.1 EDR) may be connected to smartphones or other Bluetooth
devices/equipment, in addition to the record player. It may be used on its own.
• Devices running out-of-date Bluetooth versions may fail to connect.
- EN 5 -