Frost Alarm; Temperature Indicator; Alarm Clock; Setting The Alarm - Hama Bahamas Instructions De Fonctionnement

Table des Matières
Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16

7.8 Frost alarm

• If the outdoor temperature is between -1°C and +1°C, the frost
symbol flashes in the display.
• If the outdoor temperature is constantly below -1.1°C, the frost
symbol lights up constantly.

Temperature indicator

• Briefly press the Down button (D) to switch between Celsius
and Fahrenheit.

7.9 Alarm clock

Setting the alarm

You can set two different alarm times, Alarm 1 and Alarm 2.
• Briefly press the Set button (A) to go to "Alarm 1" alarm mode.
"0:00 A1" appears in the display.
• Press and hold the Set button (A) for around 3 seconds.
• The hour display starts to flash.
• Press the Up button (C) or Down button (D) to select the hour
of the alarm time and confirm the selection by pressing the
Set button (A).
• The minute display starts to flash. Repeat the procedure for the
minutes of the alarm time.
• Confirm the selection by pressing the Set button (A). Press the
Alarm button twice in quick succession to go to alarm mode
"Alarm 2". "0:00 A2" appears in the display. Repeat the above
steps to set the alarm time.
Note
Press and hold the Up button (C) or Down button (D) to select
the values more quickly.
Deactivating / activating the alarm
Briefly press the Set button (A) to display the set alarm time. 1x
for Alarm 1 and 2x for Alarm 2. When the alarm time is displayed,
press the Up button (C) to activate the alarm time. An active alarm
clock is shown in the display with the alarm clock symbol (23, 25).
Note - Alarm
Once the alarm clock is activated, it is triggered at the
corresponding time and for approx. 2 minutes an alarm signal
is heard. The frequency of the alarm signal increases as the
duration of the alarm increases (speed alarm). After this, the
alarm clock is stopped automatically and triggered again at the
set alarm time the following day.
Note – Snooze function
• During the alarm signal, press the Snooze button (19) to
activate the snooze function. The alarm signal is interrupted
for 5 minutes and then triggered again.
• The snooze function can be terminated by any button except
the Snooze button.

7.10 Backlight

Press the Snooze/Light button (19) to illuminate the display for
around 10 seconds.
8. Care and maintenance
• Only clean this product using a lint-free, slightly damp cloth and
do not use any harsh cleaners.
• Ensure that no water is able to enter the product.

9. Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.
10. Technical data

Weather station

Base station
4.5 V,
Power supply
3 x AAA batteries
Measuring range
Indoors
Measuring range
Outdoors
Measuring
increments
Temperature
Range
Barometer
Max. number
of measuring
stations
Measuring station
3 V,
2x AA batteries
0°C – +50°C / 32°F – +122°F
-20°C – +60°C / -4°F - +140°F
20% - 95%
≤ 50 m
internal, without display
3
9
Table des Matières
loading

Ce manuel est également adapté pour:

00222228

Table des Matières