Proper Handling Of Batteries; Proper Handling Of The Product - DS Produkte Z 07259 Mode D'emploi

Proper handling of batteries

• Before inserting the batteries, check whether the contacts in
the battery compartment and on the batteries are clean and,
if necessary, clean them.
• Only use the battery type specifi ed in the technical data
(see section "Technical data").
• When replacing the batteries, make sure that the polarity
(+/–) is correct.
• Remove the batteries from the battery compartment if they
are empty or if you are not using the product for an extend-
ed period. This way, you can avoid damages attributed to
leaking.
• If the batteries have leaked, avoid contact of the skin, eyes
and mucous membranes with the battery acid. In the event
of contact with the battery acid, rinse the affected areas in-
stantly with plenty of clean water and immediately consult
a physician.
• Immediately remove any leaking batteries from the battery
compartment. Clean the contacts before you insert new bat-
teries.
• The batteries may not be charged or reactivated with other
means and they may not be disassembled, thrown in a fi re,
submerged in a liquid or short-circuited.

Proper handling of the product

• Check the devices for damages prior to each use. The de-
vices may not be used if they exhibit visible damages. Do
not attempt to repair the devices or to replace parts your-
self. In the event of damage, contact the customer service
department.
19 GB