BH FITNESS LK700R CORE Guide D'utilisation page 17

STEP 3
Attach the Rear Stabilizer (C) to the Rear Frame
(B) with 2 Hex Screw (K05) and 2 Spring
Washer (K06) and tighten securely.
STEP 4
Connect the wire from the Right Handlebar (M), to the wire coming from Rear Frame
(B). There are 2 connection points on each wire (the 2-prong connection (pulse) can go
on either connection coming out of the machine and the other connections can only be
connected one way). After connecting the wires attach the Right Handlebar (M) to the
Rear Frame (B) with 4 Hex Screws (K07) and 4 Spring Washers (K08). Do the same for
the Left Handlebar (L). Finally, place the Cup Holders (O) into the respective slots on the
handlebars and turn clockwise until the cup holders seat into the slots.
B
B
17
LK700R CORE v4