BH FITNESS LK700R CORE Guide D'utilisation page 19

STEP 6
Slide the Control Tube Cover (N) onto Control Tube (F) (Pictured in Figure 6-1). Then thread
the lower control wires from the Front Frame (A) through the Control Tube (F).
Attach the Control Tube (F) to the Front Frame (A) with the 3 Hex Screw (K13), 3 Spring
Washer (K14) and 3 Washer (K21), then tighten firmly. Attach the Handrail Tube (E) to the
Control Tube (F) with 2 Hex Screw (K16), 2 Spring Washer (K01) and 2 Washer (K15).
Assemble the left & right foot pedals (K, J). Each foot pedal is labeled with "L" and "R" for
left and right. Please make sure you are attaching the correct pedal onto the correct side. The
Left Foot Pedal (K) tightens counterclockwise and the Right Foot Pedal (J) tightens clockwise.
Fig. 6-1
A
19
LK700R CORE v4