Options; Accessories - Electrolux EFME517S Instructions D'installation

20

Options

Accessories

MATCHING STORAGE PEDESTAL*
White Pedestal - P/N EPWD157SIW
Titanium Pedestal - P/N EPWD157STT
A storage pedestal accessory, specifi cally
designed for this dryer may be used to elevate
the dryer for ease of use. This pedestal will add
about 15" (38 cm) to the height of your unit.
*Other colors may be available. Contact the source
where you purchased your dryer.
DRYER STACKING KIT
P/N STACKIT7X
Depending on the model you purchased, a kit for
stacking a matching dryer on top of this washer
may have been included in the initial purchase
of your dryer. If your model did not include a
stacking kit or you desire another stacking kit, you
may order one.
LP CONVERSION KIT
P/N 134709300
Gas dryers intended for use in a location
supplied with LP must use a conversion kit prior
to installation.
MOBILE HOME INSTALLATION KIT
P/N 137067200
Installations in mobile homes require use of
MOBILE HOME INSTALLATION KIT.
DRYING RACK
P/N A04840701
Depending on the model you purchased, a
drying rack may have been included in the
initial purchase of your dryer. If your model did
not include a drying rack or you desire another
drying rack, you may order one.
UNIVERSAL APPLIANCE WRENCH
P/N 137019200
A UNIVERSAL APPLIANCE WRENCH is
available to aid in dryer/washer/pedestal feet
adjustment.
TOUCH UP PAINT PENS
White - P/N 5304468812
Titanium - P/N 5304475700
*Other colors may be available. Contact the source
where you purchased your dryer.
Replacement parts in U.S. and Canada:
If replacements parts are needed for your
dryer, you can contact the source where you
purchased your dryer, call 1-877-4ELECTROLUX
(1-877-435-3287) in the U.S. or 1-800-265-8352
in Canada, or visit our website, www.
electroluxappliances.com, for the Electrolux
Authorized Parts Distributor nearest you.
CAUTION
Failure to use accessories manufactured by (or
approved by) the manufacturer could result in
personal injury, property damage or damage
to the dryer.
WARNING
ELECTRICAL HAZARD
Label all wires prior to disconnection when
servicing controls. Wiring errors can cause
improper and dangerous operation. Verify
proper operation after servicing.