Maintenance And Cleaning - Hazet 772-2/16 Mode D'emploi

5. Maintenance and Cleaning

The threaded spindle is to be lubri­
cated before each use
Indicate the HAZET article number
when ordering spare parts and
accessories.
Maintenance
• Always keep the Universal Axle and Slotted
Nut Wrench clean, regularly check it for cor-
rosion and if necessary, clean it with an oily
cloth.
• Only use spare parts recommended by the
manufacturer, otherwise the warranty will be
void.
• Repair work must only be carried out by
the manufacturer or by qualified personnel,
using the original spare parts.
• When disposing of components, lubricants,
etc., please take care that the valid reg-
ulations for environmental protection are
observed.
• For cleaning the tool or its components, we
recommend to use an oily cloth.
• Do not use solvents or acids, esters (organic
compounds of acids, esters (organic com-
pounds of acids and alcohol), acetone
(ketone), chlorinated hydrocarbons or nitro-
carbonic oils to clean the tool. Do not use
chemicals with a low flashing point.
• For after sales service, please contact your
retailer/distributor.
18
c
Design and Function