Prior To Operation - Hazet 772-2/16 Mode D'emploi

3. Prior to Operation

Universal Axle and Slotted Nut
Wrench have to be used, inspect­
ed and maintained with the
respective local, state, national or
federal regulations.
• Prior to using the HAZET Universal Axle and
Slotted Nut Wrench must be checked for
damages and if the tool is not in a consist-
ently impeccable condition, put it out of
operation.
• Choose an appropriate drive tool with 20 mm
external square (for example Reversible
Ratchet with Handle Bar HAZET 1016/2).
Provide a support for operation (for example
HAZET 217-3/2 Jack Stand).
4. Operation
• Keep these instructions. Read and follow the
information given for your own safety.
Make sure that the user knows about the
risks which may occur while using this prod-
uct.
• Follow the instructions of the respective car
manufacturer.
• Prior to operation, make sure that the tools
are in correct position to avoid damages of
vehicle parts.
4.1 Operation of axle nuts
(installation / removal)
• Secure the vehicle from rolling away.
• Adjust the basic appliance to the size of the
axle nut by using the spindle.
It is not possible to operate conical
axle nuts.
16
c
Design and Function
• Fasten the safety chain (if needed by
Illustration 1
Illustration 2
• Provide a support for operation (for example
Illustration 3
• Install / remove the axle nut.
the use of the extension chain) to fix the
jaws of the basic appliance as well. At
this the gripping mechanism is to be
operated by the hexagon screw size 6
(see illustration 1 and 2)
HAZET 217-3/2 Jack Stand).
(see illustration 3)