For Your Information; General Information; Explanation Of Symbols; Liability And Warranty - Hazet 772-2/16 Mode D'emploi

1. General Information

• Please make sure that the user of this tool
carefully reads these operating instructions
and fully understands all information given
before it is used.
• These operating instructions contain impor-
tant advice that is necessary for a safe and
trouble-free operation of your HAZET tool.
• For effective use of the tool as intended, it
is essential that all safety and other infor-
mation in these operating instructions is
adhered to.
• For this reason, always keep these operat-
ing instructions together with your HAZET
tool.
• This tool has been designed exclusively for
specific applications. HAZET emphasizes
that any modification to the tool and/or
use on an application not detailed to its
intended application are strictly forbidden.
• HAZET will not be liable for any injuries to
persons or damage to property originating
from improper application, misuse of the
tool or a disregard of the safety instructions.
• Furthermore, the general safety regulations
and regulations for the prevention of acci-
dents valid for the application area of this
tool must be observed and respected.

2. Explanation of Symbols

ATTENTION : Please pay attention to these
symbols!
Read the Operating Instructions!
The user/owner of this tool is obliged
to observe the operating instructions
and should ensure that all users of
this tool use it according to the infor­
mation given in this manual.
NOTICE!
This symbol marks advice which is
helpful when using the tool.
a

For Your Information

CAUTION!
This symbol marks important specifi­
cations, dangerous conditions, safety
risks and safety advice.
ATTENTION!
This symbol marks advice which
if disregarded results in damage,
malfunction and/or functional failure
of the tool.
3. Liability and
Warranty
• Any deviation from the intended use and/
or any misapplication of the tool is not
allowed and will be considered as improper
use.
• Any claims against the manufacturer and/
or its authorized agents because of damage
caused by improper use of the tool are void.
• Any personal injury or material losses
caused by improper use of the tool are the
sole responsibility of the operator and user.
11