Child Lock Function - Johnson Controls Jcrl120Pw Manuel D'instructions

9. Operation

Child lock function

Press the buttons "
child lock function and lock all buttons on the wire controller.
You can't press the button to operate and receive the remote
control signal after the child lock is activate.
Press these two buttons again for 3 seconds to deactivate the
child lock function.
When the child lock function is activated, the" "mark appears.
Swing function(For the units with horizontal & vertical
swing features only)
1 Up-Down swing
Press the SWING button to start up-down swing function. The
" " mark appears. Press it again to stop.
2 Left-Right swing
Press the Swing button for 2 seconds to start Left-Right swing
function. The "
to stop.
" and " " for 3 seconds to activate the
" mark appears. Press it for 2 seconds again
20
V.1