Installation Method - Johnson Controls Jcrl120Pw Manuel D'instructions

3. Installation method

1.Wired remote controller structural dimensions
120mm
2.Remove the upper part of wired controller
Insert a slot screwdriver into the
slots in the lower part of the wired
controller (2 places), and remove
the upper part of the wire controller.
(Fig.3-2)
NOTE: Do not pry up and down, you can only rotate the
screwdriver.
20.6mm
Fig 3-1
Buckling
position
4
46mm
60mm
Back cover
Fig 3-2
V.1