Commissioning And Configuration - Hama Wfc 310 Manuel D'instructions

•
•
•

5. Commissioning and configuration

Inserting batteries/Changing batteries
•
•
Note!
All internal data is deleted when you change the batteries. The
configuration parameters (weather region, time zone and contrast)
must be entered again (see the following chapter). Receiving all
weather data requires a period of at least 24 hours.
Calling up the configuration menu
•
Exiting the configuration menu
•
Setting the weather region
•
18
Downloaded from www.Manualslib.com
The distance from the transmitter does also influence the
reception. Areas such as Southern Italy or Northern Scandi-
navia are also critical areas because of the great distances
from the transmitter.
In all regions, so-called "dead spots" can occur making
reception impossible.
Weak batteries in the device decrease the quality of recep-
tion.
Open the tranmitter´s batteries compartment and insert 2
batteries (LR03/Micro/AAA) respecting polarities.
Open the battery compartment at the rear of the weather
station and insert the three batteries (LR6/ Mignon/ AA),
ensuring proper polarity, into the battery compartment.
When disposing of dead batteries, see note on the disposal
information.
Press the <SET> button for at least three seconds. The first
point in the configuration menu (weather region) is called
up.
Press the <SET> button as often as required to reach the
normal display again.
After calling up the configuration menu, the setting mode
is active for the weather region. The text "loc" is shown on
the display. The currently defined region is shown directly
to the right. Use the <+> button to select the desired region
now (see Appendix).
manuals search engine