Troubleshooting; Indicator Leds On Mower - GreenWorks Commercial 2528102 Manuel Opérateur

Troubleshooting

This section also presents some symptoms that can guide you if the mower does not work as expected.

INDICATOR LEDS ON MOWER

LED STATUS
1. Operating Flashing
(Green)
On
Off
2. Connectivity Flashing
(Blue)
On
Off
3. Security Flashing
(Yellow)
Off
4. Error Flashing
(Red)
INDICATOR LEDS ON CHARGING STATION
LED STATUS
Green On
Blue Flashing
Red Flashing
- Off
MEANING
Recovery mode
Mower in operation mode (charging, parked in Charging
station, paused, mowing or searching)
Mower stopped with Stop button on mower, safety key in
Disabled position, mower in error state or mower waiting
for PIN code.
Trying to connect to internet server
Connected to internet server
Mower not in "Power on mode"
PIN code authorization required
No pin required
Mower stopped with error
MEANING
Boundary wire and Charging station OK
Boundary wire broken or not connected
Electronic fault in charging station or power supply Unit
No power to Charging station or mower in Energy Saving
mode.
ACTION
Place the robot in charging station for up to 5
hours and wait for the green LED to stop flash.
If LED doesn't stop flash then restart the robot
outside the CS and try again.
... via Mobile App.
No action required
Check the reason for the error and then restart
by pressing the Start button on the mower.
ACTION
No action required.
Check and repair boundary wire.
Please contact your dealer
Check main voltage. See section "Energy
Saving Mode" on page 20
Version 3 - 2021.03.11
EN
25