Tools Needed; Materials Needed - Gaggenau Df290760 Instructions D’installation

TOOLS NEEDED

Hammer
Wire Cutter

MATERIALS NEEDED

(Additional materials may be required to comply with local codes.)
2
Downloaded from www.Manualslib.com
Hole Saw
Slot Screwdriver
Wire Stripper
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground, insulated
copper conductors rated 75°C or higher.
Hot Water Supply Line - Minimum 3/8" O.D. copper tubing or metal braided
dishwasher supply line.
Shut-off valve and fittings appropriate for hot water supply line (copper tubing/
compression fitting, or braided hose).
90° elbow with 3/8" N.P.T. male threads on one leg, and sized to fit your water supply
line (copper tubing/compression fitting, or braided hose) on the other leg.
Teflon brand tape or other pipe thread compound to seal plumbing connections.
UL listed conduit connector or strain relief.
manuals search engine
Tools and Materials Needed
Adjustable Wrench
Phillips Screwdriver
Drill
Tape Measure
T-15 Screwdriver
Level