Switching Off And Retracting Power Cord; Transport And Storage - Dirt Devil Twinfinity M5040 Manuel D'utilisation

Operation
12
3.2 Switching off and
retracting power cord
13

3.3 Transport and storage

14
28
6. When working with the cylinder vacuum cleaner, pull if
after you like a sleigh. Follow the respective recommen-
dations of the flooring manufacturers.
NOTE:
With the bypass vent (Fig. 12) you can quickly reduce
suction power if less suction is needed, e.g. to release
objects accidentally sucked in.
1. Switch off the cylinder vacuum cleaner with the on/off
switch (Fig. 13/1) and pull the plug from the mains sock-
et.
2. Keep the plug in your hand.
WARNING:
Danger of injury! During retraction the power cord can
whip around, become an obstacle or overthrow objects.
Therefore keep the plug in your hand and guide it during
retraction of the power cord.
3. Push the cord retracting button (Fig. 13/2) to retract the
power cord.
„
To transport the cylinder vacuum cleaner you can car-
ry it by the handle (Fig. 1/7).
WARNING:
Danger of injury! Switch off the appliance when not work-
ing with it and observe the notices under ZChapter 3.2,

"Switching off and retracting power cord".

„
To store it or when not working with it you can hook the
parking-hook onto the parking-bracket (Fig. 14).
It is recommended to first retract the telescopic tube.
ATTENTION:
Never store the appliance next to heat sources (e.g.
stoves or radiators). Avoid exposing it to direct sunlight.
The heat might damage the appliance.
„
Before storing it for a longer time empty the dust con-
tainer an dispose ZChapter 4.1, "Emptying the dust con-
tainer" of it in an orderly manner.
„
Always store the appliance in a cool, dry place and out
of reach of children.