Dimplex FD 9305 Instructions De Fonctionnement page 35

L14<











Downloaded from www.Manualslib.com
Sets the start time for the thermal disinfection.

Sets the desired domestic hot water set temperature which is to be

reached during thermal disinfection.
For each week day, it is possible to select whether thermal

disinfection is desired at the set start time.
The circulation pump is controlled by a timer function.
Sets the times at which the circulation pump is to be activated.


For each week day, it is possible to select whether Time1, Time2,

no time or both times are active for the circulation pump.
Operations that exceed a week day are activated or deactivated at
the end of each day accordingly.
Sets the desired swimming pool temperature.
Sets the desired swimming pool temperature with parallel cooling
operation.
Sets whether the waste heat recovery during cooling is dependent
on the switching status of the thermostat or in continuous
operation.
Sets the time programs for blocking swimming pool water
preparation.
Sets the times for the swimming pool block.


For each week day, it is possible to select whether Time1, Time2,

no time or both times are active for a block. Blocks that exceed a
week day are activated or deactivated at the end of each day
accordingly.
Sets the time programs for the prioritisation of swimming pool
water preparation.
Sets the start time for the prioritisation of swimming pool water

preparation.
Sets the desired number of hours of the prioritisation of the

swimming pool water preparation.
For each week day, it is possible to select whether prioritisation is

desired at the set start time.
The language for menu navigation can be selected from the
available languages. The 'ENTER' key is used to confirm the
selection and the 'ESC' key is used to cancel the selection.
Additional languages are available from the after-sales service via
Smart Key.
manuals search engine
System-specific parameters
452114.66.71 FD 9305
Wärmepumpenmanager
Setting range
00:00 ... 23:59
60 °C ... 85
N / Y
00:00 ... 23:59
00:00 ... 23:59
N / T1 / T2 / Y
5 ... 25 °C ... 60
5 ... 25 °C ... 60
No / Yes
00:00 ... 23:59
00:00 ... 23:59
N / T1 / T2 / Y
00:00 ... 23:59
1 hours... 10
N / Y
EN-11