Chauvet GROUNDSTACKKIT Guide De Référence Rapide page 4

Setup
To ensure stability during operation, place ballast weights (sandbags or steel weights) evenly over the floor bars or the
ladder pipe.
Ballast Weight Requirements
Ballast per 1M Height Stack
150 lb (68 kg)
The ballast weights stated in this specification are for indoor usage only. If this kit is used outdoors, the
unit must be protected from wind and additional ballast (as determined by a qualified and competent
rigger) must be utilized.
Ground Stack Kit QRG Rev. 1
QUICK REFERENCE GUIDE
Ballast per 2M Height Stack
200 lb (90.7 kg)
Sandbag placement
Ballast per 3M Height Stack
275 lb (124.7 kg)
EN
2