Operating One Component While Using Another (Background Operation) - Sony SDP-E300 Mode D'emploi

The SYSTEM CONTROL/FUNCTION buttons on
the remote are factory-set as follows:
To listen to
Records
Radio programmes
Compact discs (CD)
Audio tapes (Tape deck B)
VHS Video tapes
(Remote control mode VTR 3)
Laserdiscs
TV programmes
Other components
* The input selector switches to LINE IN. If you
connect a Sony amplifier (that can be controlled by
infrared wireless remote) to the LINE IN jacks of
the processor, the amplifier's input selector
automatically switches to the selected component.
** If you connected an additional audio component to
the LINE jacks as shown on page 6.
If you want to change the factory setting of a
button, see page 10.
If the component does not turn on
Press the power switch on the component.
2
Start playing.
Refer to "Remote Button Descriptions" on page 18
for details.
To turn off the components
Press SYSTEM OFF.
If you use a Sony TV
When you press TV to watch a TV programme, the TV
turns on and switches to the TV input. The TV also
turns on when you press VIDEO 1 or VIDEO 2 and
switches to the appropriate video input.
If the TV does not switch to the appropriate input
automatically, press TV/VIDEO on the remote.
Operating one component while using
another (Background Operation)
You can temporality operate other components while
Press
listening to or watching a programme.
PHONO*
TUNER*
CD*
TAPE*
VIDEO 1
Numeric buttons
VIDEO 2
TV
BACKGROUND
LINE**
1
2
The numeric buttons are assigned to select the
functions as follows:
Numeric button
*
Processor Operations
Hold down BACKGROUND.
Press both the corresponding numeric button of
the component you're going to use (see the table
below) and one of the following buttons at the
same time; VISUAL POWER, TV/VIDEO, CH
PRESET +/–, ANT TV/VTR, D.SKIP, (, 9, p,
0 / ) , = / + , P , r .
Example: To start recording on the VCR while
watching TV.
While holding down BACKGROUND,
press 9 (or 8) and press r at the same
time.
Operates
CD player
1
DAT deck
2
MD deck
3
Tape deck A
4
Tape deck B
5
LD player
6
VCR (remote control mode VTR 1*)
7
VCR (remote control mode VTR 2*)
8
VCR (remote control mode VTR 3*)
9
TV
0
Sony VCRs are operated with a VTR 1, 2 or 3 setting.
These correspond to Beta, 8mm and VHS respectively.
(continued)
GB
9