Setup; Sound Customizing; Subwoofer On And Off; Setting The Subwoofer System - Alpine CDE-9852 Mode D'emploi

SETUP

You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from Sound Customizing, Visual
Customizing, etc., to select your desired setting.
Rotary encoder MENU
MODE
A typical SETUP procedure is shown in steps 1 to 4 as
follows. See below for further information about each
SETUP menu.
1
Press MENU to select the SETUP mode, then press
MODE.
BASS ENGINE SETUP
2
Press or to select the desired SETUP
menu, then Press MODE.
(e.g. Select SUBW
OOFER
DIMMER SUBWOOFER
PLAY MODE SCROLL TYPE
POWER IC DEMO
* Displayed only when SUBW is ON.
3
Turn the Rotary encoder to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.

Sound Customizing

Subwoofer On and Off

SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 In the normal mode, press MODE repeatedly to select the
SUBW mode.
BASS TREBLE SUBW
DEFEAT VOLUME
2 Adjust the Level by turning the Rotary encoder.
RETURN (OFF) BASS ENGINE
)
(SUBW SYSTEM) *
TEXT SCROLL
DIMMER
BALANCE FADER
BASS

Setting the Subwoofer System

SUBW SYS1 (Initial setting) / SUBW SYS2
Select either SYS1 or SYS2 for the desired subwoofer effect.
SUBW SYS1: Subwoofer level changes according to the main
volume setting.
SUBW SYS2: Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.

Visual Customizing

Dimmer Control

DIMMER AUTO (Initial setting) / DIMMER MANU
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit's backlighting is too bright at night.

Scroll Type Setting

SCROLL TYPE1 / SCROLL TYPE2 (Initial setting)
Choose from two scrolling methods.
Select the type you prefer.
SCROLL TYPE1: The characters scroll sequentially, appearing
from the right side of the display.
SCROLL TYPE2: The characters are displayed one by one,
and disappear one by one from the left side
of the display after the screen is filled up with
the characters.

Scroll Setting (TEXT SCROLL)

SCROLL AUTO / SCROLL MANU (Initial setting)
This CD player can scroll the disc and track names recorded on CD-
TEXT discs, as well as the text information of MP3/WMA files, folder
names, and tags.
SCROLL AUTO: The CD text information, the text information of
folder and file names, and the tags are
scrolled automatically. Also, tag information is
automatically scrolled without pressing TITLE
in the tag information display mode.
SCROLL MANU: The display is scrolled when a disc is loaded
or when a track is changed, etc.
• The unit scrolls CD text names, folder names, file names or tag
display.

Demonstration

DEMO ON / DEMO OFF (Initial setting)
This unit has a demonstration feature for the display.
• To quit Demo mode, set to DEMO OFF.
15
-EN