3M Performance Spray Gun Manuel Du Propriétaire page 4
Company
3M Company
Address
3M Center, Building 223-6N-01
St Paul, MN USA 55144-1000
Does hereby declare under our sole responsibility that this equipment or product(s) comply with the applicable
essential requirements of the legislation listed below; along with the referenced standards or specifications.
•
Object
Product name and/or model number(s) and/or unique identification:
3M "Performance Spray Gun"
Type and/or description and/or intended purpose or equipment class and/or
particular conditions applicable to the use of the Object:
Part numbers: 26978, 26878, 26778, 26832, and all kit products which
include these part numbers
Serial number or range (if applicable):
Year of manufacture: "20ab"-to-"2099", where "ab" is any 2-digit number.
Conforms to the following UK legislation; together with all amendments to-date:
Directives:
Supply of Machinery (Safety) Regulations 2008,
Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres Regulations 2016
/
Standards
specifications
EN ISO 12100:2010
EN 1953:2013
EN 14462:2005+Al:2009
EN ISO 80079-36:2016
(@ II 2G Ex h 11B T4
Signature
� L. �
\J
Name of Signer
Stacee L. Royce
Person authorized to compile the technical file, established in the UK.
Name and Title
Tony Stanford, Northern European R&D Operations
Leader
UK Declaration of Conformity
/
provisions complied with; in full or in part as applicable:
Safety of machinery. General principles for design. Risk assessment and risk
reduction
Atomizing and spraying equipment for coating materials. Safety requirements
Surface treatment equipment. Noise test code for surface treatment
equipment including its ancillary handling equipment. Accuracy grades 2 and 3
Explosive atmospheres - Part 36: Non-electrical equipment for explosive
atmospheres - Basic method and requirements
ORIGINAL
Division
Automotive Aftermarket Division
Date
05/18/2022
Title
Vice President and Technical Director
Address
3M United Kingdom PLC, 3M Newton Aycliffe,
Heighingtin Lane, Aycliffe. Co, Durham I DLS GAF
2
UK
CA
-
Illustration
Typical
Place
St. Paul, Minnesota USA
